Technology of Electrical Automatic

TCP232-410s RS485 to Ethernet Converter

TCP232-410s RS485 to Ethernet Converter

TCP232-410 RS485 to Ethernet Converter is a dual serial server that supports RS232 & RS485 working at the same time. It adopts a Cortex-M4 solution and its basic frequency is up to 120MHz. Besides, the internal serial server integrates TCP/IP protocol stack.

Category:

TCP232-410 RS485 to Ethernet Converter is a dual serial server that supports RS232 & RS485 working at the same time. It adopts a Cortex-M4 solution and its basic frequency is up to 120MHz. Besides, the internal serial server integrates TCP/IP protocol stack.

Category:

RS485 to Ethernet Converter Features

  • New Cortex-M4 kernel industrial working temperature range(-40~85℃) elaborate optimization
  • TCP/IP protocol stack stable and reliable
  • Auto-MIDX function discretionarily connect cross-over or direct network cable automatic switching.
  • Support TCP Server / TCP Client / UDP Server / HTTPD Client / websocket various of ethernet protocols
  • Support virtual serial port provide corresponding software
  • Serial port highest baud rate from 600bps to 1024000bps
  • Support DHCP automatically access IP, can inquire the facility within network through the UDP broadcast protocol (using software USR-TCP232-E45 Setup
  • A built-in web page also parameter setting via web can customize web pages for users
  • RJ45 status indicator light RJ45 interface
  • Built-in isolation transformer 2 KV isolation.
  • Support upgrade firmware via network.
  • Support visit IP and domain name at the same time.
  • Support up to 8 link from client when act as TCP Server same data will be send to all client.
  • Can modify http server port from default port 80 for module built-in http server.

Introduction of RS485 to Ethernet Converter

Specification

Interface Standard RJ45 *1
Rate 10/100 Mbps MDI/MDIX,
auto switch between cross and direct connection
Protection 2KV electromagnetism isolation, shell insulation blocking
Network Protocol IP, TCP, UDP, DHCP, DNS, HTTP, ARP, ICMP, Web socket, Httpd client
Receive Buffer Max 16k bytes buffer
Serial Port Number 2 (1*RS-232, 1*RS-485, can work at the same time)
Interface Standard RS-232: DB9 pin type, RS-485: 3 wire (A+, B-, G)
Baud Rate RS-232: 600 bps ~ 230K bps, RS-485: 600 bps ~ 1M bps
Flow Control RTS/CTS
Buffer Send and receive 2k bytes respectively
Protection RS-485: anti-static 2KV, lightning protection
RS-485 Pull-up and Pull-Down Resistor 2.2 KΩ
Software  Virtual Serial(USR-VCOM) Windows 2000 or higher (32 bit/64 bit)
Configuration Built-in webpage, computer set-up software, serial command
Size 80 x 62 x 24 mm
Operating Temp. -40 ~ 85°C
Storage Temp. -45 ~ 105°C, 5 ~ 95% RH
Input Voltage DC 5 ~ 36V
Working Current
86.5mA(aver)@ 5V
44.3mA(aver)@ 12V
Power <1W
Accessory 5V1A high-quality power supply, serial line, cable

Downloads

Datasheet of USR-TCP232-410s

USR-TCP232-410s User Manual_V1.1.1.01