The ZP-05 HART Temperature Transmitter is designed to meet common Single Point measurement application requirements. This temperature transmitter can easily work with a variety of sensors (RTDs and thermocouples) and thermowell. It is provided in a head mount configuration suitable for installation in a wide variety of connection heads and housings.
It Provides HART protocol, equipped USB mini-USB interface, and an easy-to-use configuration method from any PC.
The ZP-05 HART Temperature Transmitter is designed to meet common Single Point measurement application requirements. This temperature transmitter can easily work with a variety of sensors (RTDs and thermocouples) and thermowell. It is provided in a head mount configuration suitable for installation in a wide variety of connection heads and housings.
It Provides HART protocol, equipped USB mini-USB interface, and an easy-to-use configuration method from any PC.
Input of ZP-05 HART Temperature Transmitter:
| Input signal | Resistance temperature detector (RTD), thermocouple (TC) |
| Cold-junction compensation | -20 -60°C |
| Compensation precision | ±1°C @ temperature scope |
Output:
| Output signal | 4-20mA, overlaid HART protocol |
| Load resistance | RL≤(Ue-12)/0.021 |
| Output current of upper and lower limit overflow alarm |
IH=21mA, IL=3.8mA |
Other:
| Supply voltage | DC12-40V |
| Temperature drift | 0.0075%FS/°C |
| Response time | Reach to 90% of the final value for 700ms |
| Used environmental temperature | -40 – 80°C |
| Storage temperature | -40 – 100°C |
| Insulation strength (between input and output) |
1500Vrms (1 min, without spark) |
| Insulation resistance (between input and output) |
≥100MΩ(under the 500 VDC) |
| Aseismicity | 4g/2 – 150Hz |
| Installation angle | Unlimited |
| Installation area | B-type top cassette installation |
| Electromagnetic compatibility | Conform to GB/T18268 industrial equipment application requirements, equal IEC 61326-1 |
Input type and transmission accuracy:
| Model | Type | Measurement scope | Minimum measurement scope | Conversion accuracy (larger value) |
| Resistance temperature detector (RTD) |
Pt100 | -200～850°C | 20°C | ± 0.1%range Or± 0.2°C |
| Cu50 | -50～150°C | 20°C | ± 0.1%range Or± 0.2°C | |
| Thermocouple (TC) |
B | 100～1820°C | 500°C | ± 0.1%range Or± 1.5°C |
| E | -100～1000°C | 50°C | ± 0.1%range Or± 0.5°C | |
| J | -100～1200°C | 50°C | ± 0.1%range Or± 0.5°C | |
| K | -180～1372°C | 50°C | ± 0.1%range Or± 0.5°C | |
| N | -180～1300°C | 50°C | ± 0.1%range Or± 0.5°C | |
| R | -50～1768°C | 500°C | ± 0.1%range Or± 1.5°C | |
| S | -50～1768°C | 500°C | ± 0.1%range Or± 1.5°C | |
| T | -200～400°C | 50°C | ± 0.1%range Or± 0.5°C |
Notes:
