Specification
ZJB-DT Battery Discharge Tester is suitable for battery: DC110 or DC220V
| Charge/discharge voltage |
DC88V-264V |
| Charge/discharge current |
0-60A |
| Working mode |
-
- Standalone mode,
- Parallel master mode,
- Parallel slave mode,
- Remote controlled mode
|
| Protection performance |
-
- Battery test
- Overvoltage protection,
- Undervoltage stop,
- Overcurrent protection,
- Reverse wiring protection,
- 65℃ overtemperature protection,
- With LCD prompt and buzzer alarm
|
| Cell voltage collection (optional) |
-
- Multi-band RF wireless module
- Communication distance of more than 100m,
- Compatible with 2V/4V/6V/12V cell voltage monitoring,
- 1-25 groups of RF wireless monitoring modules monitoring up to 300 batteries
- Single wireless monitoring module support monitoring 12 cells
|
| Control precision |
-
- Discharge current≤±1%;
- Group terminal voltage≤±0.1%;
- Cell voltage≤±0.05%
|
| PC communication |
RS485 interface, USB interface |
| Data storage capacity |
Built-in SD card with a capacity of 8G and the USB flash drive with a capacity of 16G |
Work Environment:
| Heat radiation |
Forced air cooling |
| Temperature |
-
- Working rage: -5-50℃
- Storage temperature: -40-70℃
|
| Humidity |
Relative humidity 0-90% (40±2℃) |
| Elevation |
Rated elevation of 4,000m |
| Noise |
﹤75dB |
Working Power Supply of ZJB-DT Battery Discharge Tester:
| Power supply |
-
- Single-phase AC220V (-20%-+30%)
- Frequency: 45-65Hz;
|
| charging power supply |
Refer to nameplate parameters or case label |
| Electric strength test |
-
- Input-housing: 2200Vdc 1min
- Input-output: 2200Vdc 1min
- Output-housing: 700Vdc 1min
|
| Safety |
Compliance with EN610950 |
Wiring of battery charge discharge tester:
| AC input |
GB socket, suitable for 1-1.5mm2 cable |
| Charge/discharge current cable |
Cable quick plug (red for positive and black for negative) |
| Parallel cable (optional) |
2m 6-pin crystal plug wire |
