The DC Hall effect current sensor is a current sensor made by using the open-loop Hall effect. The primary and secondary are completely insulated. It is mostly utilized to measure DC current. This open-loop system produces an electronic output signal that can be easily connected to PLC or DSP terminal control systems for direct use.
This DC open loop hall effect current sensor is widely used in data centers, iron towers, DC screens, Frequency conversion speed regulation systems, welding machines, Communication power supply, Uninterruptible power supply(UPS), and electrochemistry.
The DC Hall effect current sensor is a current sensor made by using the open-loop Hall effect. The primary and secondary are completely insulated. It is mostly utilized to measure DC current. This open-loop system produces an electronic output signal that can be easily connected to PLC or DSP terminal control systems for direct use.
This DC open loop hall effect current sensor is widely used in data centers, iron towers, DC screens, Frequency conversion speed regulation systems, welding machines, Communication power supply, Uninterruptible power supply(UPS), and electrochemistry.
| Parameter | Value |
| Supply voltage | ±12V，±15V，+12V~+24V |
| Power consumption | <30mA |
| Measure range | ≤±600A |
| Rated output | ±4V±1%, 0-5V(+2.5V)±1%,4-20mADC±1% |
| Standards | IEC60950-1:2001 |
| Supply voltage | ±12V，±15V，+12V~+24V |
| Magnetic offset | ±20mV |
| Offset drift | @-40~+85℃, ≤±1 |
| Offset voltage | ±20mV |
| Output drift | @-40~+85℃, ≤±1 |
| Linearity error | ≤1s |
| Response time | ≤1s |
| Galvanic isolation | AC,1min, 3KV |
| Isolation resistance | @DC 500v, 1000MΩ |
| Operating temperature | -25 to +70℃ |
| Storage temperature | -40 to +85℃ |
