Technology of Electrical Automatic

MRS Remote Sensor Unit for Mico-Race

MRS Remote Sensor Unit for Mico-Race

MICO-RACE wireless temperature measurement system uses advanced cloud technology, temperature data collected by each sensor from Ethernet or 3G router, and transfer to the cloud platform, and data management through highly reliable cloud servers. Users can access temperature and humidity monitor data at any time and place through a browser in PC or mobile phone.

MICO-RACE can connect producers, distributors and transport side, organic combination of cold-chain, fresh food, medical drugs and vaccines in all aspects of state monitoring, also consumers through the cloud service know the purchase of goods meets the cold fresh preservation standards.

MICO-RACE wireless temperature measurement system uses advanced cloud technology, temperature data collected by each sensor from Ethernet or 3G router, and transfer to the cloud platform, and data management through highly reliable cloud servers. Users can access temperature and humidity monitor data at any time and place through a browser in PC or mobile phone.

MICO-RACE can connect producers, distributors and transport side, organic combination of cold-chain, fresh food, medical drugs and vaccines in all aspects of state monitoring, also consumers through the cloud service know the purchase of goods meets the cold fresh preservation standards.

Features

  • Low cost wireless temperature and humidity metering device, designed as remote sensor unit and data receiver split located.
  • Use 433MHZ public band easy to build monitor network via multi-point monitoring network
  • Maximum radio range: 2KM(outdoor)
  • Maximum 100 remote unit connect to router without repeater
  • Standard 3000mAh battery provide up to 3 million times data upload interval
  • Use numerical types probe, do not need calibration
  • Measurement accuracy up to ±0.2C and 3%RH(Depends on the sensor, standard is ±1C)
  • Built-in digital filter reduce interfere, support FHSS technology to prevent signal interference and substitution
  • With wireless configuration feature, user can remote operate MRS remote sensor:
    -. Data collect and transmit: User free to set temperature/humidity data sampling interval from 1sec to 10min, update interval from 1sec to 10h.
    -. Alarm signal: MRS provide max 4 alarm threshold(2 channel high/low) and fluctuation limit alarm.
    Battery monitor: With inside battery monitor, auto notice user before power run out.
  • Data receiver MRR provide variety of communication type. with TCP/IP port, RS232/485 port even provide GPRS remote connection, allow user free to connect to local PC or WEB server

Specifications

Electrical parameter:

Launch power Adjustable:7dbm~16dbm (1mW~50mW)
Launch current 24mA@10dbm/10mW, 60mA@17dbm/50mW
Receive current 17mA
Standby current 7uA
Power supply 3.6VIndustrial battery

Wireless features:

Working frequency ISM: 434MHz
Spread-spectrum mode Frequency hopping or fixed frequency
Channel 64 (Random allocation when the frequency hopping)
Modulation mode GFSK
Wireless rate 2.4~256 kbps (software configuration)
Channel bandwidth 12.5KHz @ 2.4kbps~9.6kbps
Receiver sensitivity -118dbm @ 2.4 kbps    -115dbm @ 9.6 kbps
-110dbm @ 20 kbps     -100dbm @ 256 kbps
Communication distance
(3dbi Omni directional antenna @9.6kbps)
Outdoor:
800m@10dbm/10mW; 2km@17dbm/50mW
Indoors with walls:
2X35CM reinforced wall layer @ 10dbm/10mW;
5X35CM reinforced wall layer 5 @ 17dbm/50mW

Communication:

Communication protocol MICO RACE V6
Network structure Peer-to-peer, star networks, tree networks, MESH
Data transfer mode MICO RACE protocol

Typical topological structure

Downloads

Brochure of MICO-RACE