Are you worried about the wet air corroding the line causing electrical failure? Try Blue Jay new humidity regulator, it can active condensate high humid air inside electrical cabinet. do not like traditional method to put in heater source.
Why need humidity control in electrical cabinet?
The term switchgear, used in association with the electric power system, or grid, refers to the combination of electrical disconnects, fuses and/or circuit breakers used to isolate electrical equipment. Switchgear is used both to de-energize equipment to allow work to be done and to clear faults downstream. This type of equipment is important because it is directly linked to the reliability of the electricity supply.
However, the current trend indicates that more and more switch gear rooms with hi-tech, state-of-the art PCB controlled switchgears are air-conditioned as the sophisticated controls of the switchgear need temperature control also. But most switchgear rooms are non air conditioned, due to extra cost of electric bill, use fan to simple exhaust air for reduce humidity still in low efficience in some area.
Blue Jay HD-X sereis automatic dehumidifier using the Patel effect, actively condense water vapor inside the cabinet by creating a local low temperature environment in controlled area, suitable for summer and some basement where difficult installation air circulatory system. A built-in small fan allows cold air to circulate inside the cabinet, reducing the operating temperature of other equipment.
Details please click here