Power Factor Corrector Features
- I / U / KW / KVAR / HZ / COS measurement and display
- 93*70 LCD display
- Anti-harmonic design
- Max 12 steps capacitor control
CB212/JKW6 Power Factor Corrector is an advanced three-phase 3-wire APFC display that provides a user-friendly interface and ease of access to parameters for manual setting built-in power analyzer. This power factor corrector allows the instantaneous display of any electrical parameter (voltage current reactive power harmonics etc). With THD protection function not affected by the harmonics can protect the capacitor from harmonic interference.
Max 12-step control 5A/250V relay output or 12VDC output. Optional RS-485 communication port easy for the user to connect to PLC and build the SCADA system. With higher measurement accuracy(0.5) and system stability, it is cost-effective and ideal for OEMs and panel builders’ solutions.
CB212/JKW6 Power Factor Corrector is an advanced three-phase 3-wire APFC display that provides a user-friendly interface and ease of access to parameters for manual setting built-in power analyzer. This power factor corrector allows the instantaneous display of any electrical parameter (voltage current reactive power harmonics etc). With THD protection function not affected by the harmonics can protect the capacitor from harmonic interference.
Max 12-step control 5A/250V relay output or 12VDC output. Optional RS-485 communication port easy for the user to connect to PLC and build the SCADA system. With higher measurement accuracy(0.5) and system stability, it is cost-effective and ideal for OEMs and panel builders’ solutions.
Power Supply | AC 220V ± 20% Consumption <12VA |
Sampling voltage | AC (110V AC ~ 690V) ± 20% 50Hz/60Hz ± 5% |
Sampling current | AC 0~5 A or AC 0 ~1 A optional |
Measuring parameters of grid | Reactive Power, Power Factor |
Measuring sensitivity | 50mA |
Measuring precision | Voltage: 0.5class; Current: 0.5 class; Power factor: 0.5 class; Frequency: 0.5 class Active power: 1.0 class; Reactive power: 2.0 class |
Dynamic response time | < 20ms @ DC 12V < 1s @ Relay 5A/250V |
Communication Port (Optional) | RS485 (2/3 wires half duplex) Modbus RTU mode |
Diamension | 144 x 144 x 50 mm |
CB212-12J / JWK6-12J | 12 steps AC contactor connection |
CB212-12D/ JWK6-12D | 12 steps DC thyristor contactor connection |